| Technologies to Maximise Productivity
in Sheet Metal Working |
| Tuesday, 27th November 2007 |
Welcome address
Dr.-Ing. Norbert Wellmann, CEO European Research Association of Sheet Metal Working, Hannover |
Conference Session I: 10.00 – 12.00
Research |
New Trends in Research on Sheet Metal Working
Dr.-Ing. Norbert Wellmann, CEO European Research Association of Sheet Metal Working, Hannover |
Sheet-Metal Research in Poland – Institutes and Programmes
Agata Walewska, AiF Kontaktbüro Warschau |
Demands on sheet metal technologies from an automotive point of view
Dr.-Ing. Steffen Kulp, Dr. Ing. Holger Heyn, R. Struck Volkswagen AG, Wolfsburg |
The steel market in Poland: Development and present situation
Andrzej Ciepiela, General Director PUDS .- Steel Stockholders Association Poland |
Conference Session II: 14.00 – 16.00
Joining |
Tightness and mechanical strength of lock bolt and link rivet joints in dependence on different materials and surface coatings
Prof. Dr.-Ing. Martin-Christoph Wanner, Dr.-Ing. Knuth-Michael Henkel, Dipl.-Wirt.-Ing. Normen Fuchs, Dipl.-Wirt.Ing. Marcus Delin, IfF Uni Rostock |
Electron Beam and Laser Beam – Tools for the Joining of Metal Material Combinations
Prof. Dr.-Ing. Ulrich Dilthey, Dr.-Ing. Klaus Woeste, Dipl.-Ing. Heinrich Masny, Dipl.-Ing. Simon Olschok, Dipl.-Ing. Nikolaus Wagner, Dipl.-Ing. Jens Holk, ISF - Welding and Joining Institute, RWTH - Aachen University |
Adhesive bonding as clamping technology for laser beam welding
Prof. Dr.-Ing. Prof. h.c. Stefan B&nhm, Fachgebiet Mikrofügen, Institut für Füge- und Schweißtechnik, Technische Universität Braunschweig |
| Wednesday, 28th November 2007 |
Conference Session III: 10.00 – 12.00
Forming |
Patchwork Blanks – an effective technology for the economic production of lightweight parts.
Dipl.-Ing. Sandra Menzel, Prof. Dr.-Ing. habil. Reimund Neugebauer, Dr.-Ing. Reinhard Mauermann, IWU Fraunhofer Chemnitz, Dr.-Ing. Jens Standfuß, Dipl.-Ing. Axel Jahn, IWS Fraunhofer Dresden |
The use of pressing technologies to produce sharply bent profiles.
Dr.-Ing. Klaus Müller, TU Berlin, Forschungszentrum Strangpressen, Prof. Dr.-Ing. Volker Thoms*, TU Dresden, Professur für Umform- und Urformtechnik |
″Process optimisation of press hardening″
Dipl.-Ing. Cord Schäffner, Institut für Umformtechnik und Umformmaschinen, Leibniz Universität Hannover |
Ceramic-steel-composite layers for sheet metal forming.
Dipl.-Ing. Lars Hauschild, Laser Zentrum Hannover |
Conference Session IV: 14.00 – 1600
Machines + Tools |
High strength Steel. Development of Steel – driving innovation forward
Roger Hannig, Stefan Woestmann, ThyssenKrupp Steel AG, Zbigniew Ferda, ThyssenKrupp Stal Serwis Polska
|
Stamping and Forming Machines for New Steel Qualities
Karl Stahl, Graebener Pressensysteme GmbH & Co KG |
Arcelor Mittal Steel Service Center & Distribution development in Central Europe
Marek Dolina, CEO AMSSC Central Europe, Bytom |
Experimental Investigation of Influencing Factors on the Dynamic Properties of Forming Presses
Dipl.-Wirtsch.-Ing. Thomas Hofmann, Department fro Process Chains and Forming Units, Institute for Production Engineering and Forming Machines, Darmstadt University of Technology |
| Thursday, 29th November 2007 |
Conference Session V: 10.00 – 12.00
Methods |
Sheet Metal Joints under Crash Loading: From Experimental Parameter Determination to FE-Simulation of Components.
Dipl.-Ing. Matthias Wißling, Prof. Dr.-Ing. Ortwin. Hahn, LWF Uni Paderborn |
Successful Handling of the Model Diversity with Stamping Simulations.
Prof. Dr.-Ing. Martin Rambke, Fachbereich Maschinenbau, FH Braunschweig/Wolfenbüttel |
Methods of the steel coils transformation – case sudy of Drozapol Profil
Thomas Milas, CEO TM Steel Sp. Z o.o., Chorzów |
